አማርኛ

Avoid these common mistakes in staircase design

Read the full vacancy

Never pay to get a job.

Addis Ababa

🏗️AVOID THESE COMMON MISTAKES IN STAIRCASE DESIGN⚠️ ☄A properly designed staircase ensures safety, comfort, and smooth movement between floors. ⏺Small design mistakes can create tripping hazards and make stairs difficult to use. 🔹 1. Avoid Extra Steps at Landings ❌ An unexpected extra step at a landing can cause people to lose their balance. Keep the landing at the intended floor level and maintain consistent riser heights throughout the staircase. 🔹 2. Keep Landings at the Correct Level ✅ Landings should provide a level resting area between flights. Proper landing design improves accessibility, safety, and the natural flow of movement. 🔹 3. Avoid Poorly Designed Winder Treads ❌ Winder stairs have wedge-shaped treads that can become dangerous when their widths vary significantly. Avoid excessively narrow treads near the inside edge, where foot placement is difficult. 🔹 4. Design Winder Steps Correctly ✅ Maintain a consistent walking line and provide uniform tread depth along it. Winder geometry should comply with the applicable building code, including requirements for minimum tread width and maximum variation. 📏 IMPORTANT STAIRCASE DIMENSIONS ✅ Riser height: Approximately 150–175 mm ✅ Tread depth: Approximately 250–300 mm ✅ Stair width: Commonly 900–1200 mm for residential applications ✅ Minimum headroom: Often around 2100 mm ✅ Landing length: Commonly at least the stair width 📐 THE STAIRCASE COMFORT FORMULA A commonly used guideline is: 2R + T = 550–700 mm Where: 🔸 R = Riser height 🔸 T = Tread depth Example: Riser = 160 mm Tread = 280 mm 2(160) + 280 = 600 mm ✅ This falls within the commonly used comfort range. However, all dimensions must comply with the building regulations applicable to your project. 🛠️ KEY DESIGN GUIDELINES ✔️ Maintain uniform riser heights and tread depths throughout each flight. ✔️ Avoid unexpected steps at landings. ✔️ Provide suitable handrails and guarding. ✔️ Ensure adequate headroom and stair width. ✔️ Design winder stairs with consistent tread geometry along the walking line. ✔️ Provide adequate lighting and slip-resistant surfaces. ✔️ Check the applicable building code before construction. 💬 QUESTION FOR CIVIL ENGINEERS: Which staircase design mistake do you see most often on construction sites? 📌 Save this post for future reference and share it with fellow civil engineers, architects, students, and site supervisors! ━━━━━━━━━━━━━━ ​📌 ተጨማሪ ዝርዝር መረጃዎችን እና የሳምንቱን የኮንስትራክሽን ዜናዎች ለማግኘት ​የፌስቡክ ገፃችን ይጎብኙ👇

Loading the original post…

Posted

From a public Telegram channel · not posted by the owner · Pin shows the area only · Yours? Claim it · Help

Follow new listings on Telegram →Where it is on the map

Hiring? Post a job free

Jobs · Real estate · Cars · Electronics · Furniture · Services